The best way to Replace 1 Side of Sliding Aluminum Windows

Aluminum sliding windows typically have two window panels — one moveable and one repaired. In case the glass breaks in one or both of the panels, or you must replace one of these for still another purpose, you really should wear protective gloves and goggles, even whenever glass is not damaged. Pane is delicate and could cause serious harm in the event that you lose your hold and trigger the glass, use stress to the framework or accidentally mishandle the window. In the event the glass is damaged, eliminate as much of it before changing the framework as possible.

Take away by opening the window completely. Grasp the sides of the panel strongly and lift it before the lip on the framework clears. Angle the panel by pulling on the bottom until the framework additionally clears.

Unscrew the screws holding the divider that is vertical to underside and the top of the frame using a Phillips screwdriver to get rid of the panel that is set.

Pat the divider using a rubber mallet, being mindful to keep the mallet from the glass far from the panel.

Grasp the panel body with a single hand before another side is clear of the framework and slide the panel. Lift it and angle the bottom toward you to take it off.

Put in a fresh repaired panel by adding the top edge to the slot in the best body as you nudge the underside within the lip on the underside frame and pushing up. Shove on the panel to the right or left side of the framework as far as it is going to go. Slip the divider into location and push the screws to to keep it in place.

Fit in a sliding panel that is new just after setting the one that is given, by reversing the process for taking outside it.

See related