The outside of your home is the first impression people get when driving upward. A home with lush landscaping and exterior finish-out will enroll with a prospective buyer than a home with no upgrades. Installing decorative exterior molding around the doors and windows on your home is 1 way set it apart from other people in the area and to upgrade the exterior look of your home. Into her home, the typical do-it-yourself homeowner may add decorative exterior molding with choice of molding.
Buy corner molding squares for every nook on the windows and the top corners of the doors. Corner molding squares come in a variety of styles and sizes, and if placed at the corner edge of the door or window, they remove the requirement for creating mitered cuts for the straight pieces of molding.
Buy molding strips to frame the doors and windows. Always buy 10 percent more casting in order to permit for mistakes, than your dimensions indicated.
Paint or stain the molding and allow it to dry completely prior to installation.
Place the corner molding bits at the top and bottom edges of the window so the corner of the molding touches the corner of the window. The top edge of the molding should create a straight line from the base of the window outward, along with the bottom edge of the molding should create a straight line from the top of the window outward.
Attach using a pneumatic nailer, or nail gun. A nail gun has become the most effective way to make a fresh attachment of the molding without the risk of splitting the timber or departing hammer marks. Use 2 1/2-inch finishing nails and place them in the center and every corner of the corner molding, at least 3/4 inch from the outside edges of the molding.
Assess the space between the corner molding bits and cut at your straight molding to match between. The way to make cuts is using a table saw or miter saw.
Place the straight molding between the mirror molding bits and nail into position using the pneumatic nailer. One nail per every foot ought to be sufficient for firm attachment.
Gaps between the corner molding and straight molding as well as nail holes with wood putty. Enable the putty to dry then sand using a hand sanding block or rotary tool. Use the paint or stain used on the molding to touch the stains that are filled up.