One of the best benefits of artificial painting is that inspiration can strike when you least expect it, causing you to change your original strategy. For example, you might have opened a frottage technique, where you stain a moist, glazed wall using tissue paper only to decide to use the paper directly to the wall to get dimension as well as color. Now, however, it can be time to get your painted tissue paper to come down. Although you might not have as much fun taking away the paper as you did applying it, then it can keep you focused on your next artistic creation and make sure that you begin it with a clean slate.
Affix painter’s tape to your baseboards to capture the water and paper fragments that drip from the wall as you eliminate the tissue paper. As an additional safeguard for your floor, spread a drop cloth, old blanket or plastic adhesive sheets close to the wall.
Cut small pieces of cardboard the size of any sockets on your wall. Cover the cardboard using masking tape to block water from seeping to the outlets.
Select the perfect tool — or even a combination of resources — to create holes in the tissue paper. Your goal here is to create holes in the paper so it’s possible to dissolve the adhesive underneath it. So if the tissue paper exhibits small cracks and bubbles, go over the wall using a straight pin, popping holes every few inches. If the tissue paper displays large bubbles and gaps, pop holes using a hair pick.
Fill a bucket with warm water and when it reaches a warm temperature that’s comfortable to the touch, wipe the wall with a large, soft sponge, similar to those utilized for washing automobiles. After the wall looks dry, repeat this step to loosen the glue under the paper.
Examine the grip of the glue by trying to remove the tissue paper using a putty knife. Based on the potency of the glue, it might come off easily at this point. If so, continue scraping away. Keep in mind it is the adhesive or glue that’s your authentic “nemesis” here since it is what is bonding the painted paper to the wall. Maintain a garbage bag nearby so you can toss glue and paper fragments promptly away.
Attack stubborn glue stains using a solution of 75 percent liquid fabric softener to 25 percent of warm water. Mix the solution in a bucket and pour it into a paint tray.
Cover the wall using the solution, employing a small or large paint roller. Use the solution just as though you were applying paint, going above the surface many times to ensure a consistent cover.
Permit the solution to sit down on the wall to get a minimum of 30 minutes. Lift the remaining paper or glue using a putty knife.
Finesse the wall, as it’s typical for little, gummy parts of glue to remain on the wall, also in this point. Remove any debris using a sponge or a putty knife.
Permit the wall to dry. Then rub together with the wall using a moist sponge and allow it to dry again. Clean it with a mild solution of sudsy water, then rub on it again while you envision plans for your next wall creation.